Kohler Engines. These are in no particular order.
| Model Number | Rod Bolts | Head Bolts | Flywheel Nut |
| K91 | 140 | 200 | 40-50 ft |
| K141 | 200 | 15-20 ft | 85-90 ft |
| K161 | 200 | 15-20 ft | 85-90 ft |
| K181 | 200 (140/100)* | 15-20 ft | 85-90 ft |
| K241 | 285 (260/200)* | 25-30 ft | 50-60 ft |
| K301 | 285 (260/200)* | 25-30 ft | 50-60 ft |
| K321 | 285 (260/200)* | 25-30 ft | 50-60 ft |
| K341 | 285 (260/200)* | 25-30 ft | 50-60 ft |
| CS4 | 106 | 177 | 48 ft |
| CS6 | 106 | 177 | 48 ft |
| CS8.5** | 106 or 120 | 36 ft | 48 or 85 ft |
| CS10 | 120 | 36 ft | 85 ft |
| CS12 | 120 | 36 ft | 85 ft |
| K482 | 200 or 300^ | 35 ft | 115 ft |
| K532 | 200 or 300^ | 35 ft | 115 ft |
| K582 | 200 or 300^ | 35 ft | 115 ft |
| K662 | 35 ft | 40ft | 130ft |
** IF SPEC NUMBER BEGINS WITH 95, USE THE LOWER VALUE. IF SPEC NUMBER BEGINS WITH 92, USE HIGHER VALUE.
* NUMBERS IN PARENTHESIS ARE FOR RODS USING POSI-LOCK BOLTS. NEW BOLT/USED BOLT TORQUE, RESPECTIVELY. OTHERWISE, ENGINE HAS CAPSCREWS.
^ 200 IN LBS FOR ENGINES WITH 5/16″ BOLTS. 300 IN LBS FOR ENGINES WITH 3/8″ BOLTS.
I need the bolt torque specs for a Kohler KH-CV740-0026 if you have them avaliable.
I need head torqe specs for a Kohler 4KHXS.4902GB 16 hp single cyl.engine.
I need torque specs on head fo modle SV690S
looking for rod bolts torque for a Kohler CV 20s
Thank you
May I have the main pulley bolt spec 23 hp Kohler
I need the torq specs for a sv830
Need specs for Kohler 16 hp tractor in regards to torque lbs
Is there a specific order to torque head bolts on a Kohler 14 hp cast iron engine