MODEL SERIES

FLYWHEEL NUT

CYLINDER HEAD

CONNECTING ROD

60000

55 Foot. Pounds

140 Inch Pounds

100 Inch Pounds

80000

55 
140 
100

81000

55

140

100

82000

55

140

100

90000

55

140

100

92000

55

140

100

93000

55

140

100

94000

55

140

100

95000

55

140

100

100200

60 
140

100

100900

60

140

100

100700

55

140

100

110000

55

140

100

120000

55

140

100

130000

60

140

100

170000

65

165

165

171100

65

165

165

190000

65

165

185

191700

65

165

185

192700

65

165 
185

193700

65

165

185

220000

65

165

185

250000

65

165

185

280000

65

165

185

230000

145

190

190

240000

145

190

190

300000

145

190

190

320000

145

190

190

400000

150

160

190

420000

150

160

190

460000

150

160

190

287700

65

220

Sm. Screw 130
Lg. Screw 260
Both Same size 185

28N700

65

220

Sm. Screw 130
Lg. Screw 260

28P700

65

220

Sm. Screw 130
Lg. Screw 260

28Q700

65

220

Sm. Screw 130
Lg. Screw 260

28U700

65

220

Sm. Screw 130
Lg. Screw 260

28W700

65

220

Sm. Screw 130
Lg. Screw 260

235400

60

35 ft

175

245400

60

35 ft

175

Looking for the engine torque specifications for model 3564473077G1 12072577
Need the specs for a Briggs 28D7070123
Looking for the engine torque Lbs.(cylinder head)for 10t5020457b1 briggs & stratton
10t series is same as 10000
on a Briggs 21 hp engine Model 3318 77 0242 G5, Serial # 00 0929 ZD 94926. What should the head bolts be torqued for replacing the gasket. Please EMail your answer to wfkutra@att.net
What are the torque specs for the engine oil pan drain plugs?
Model 095312 0266E1. Need torque specs
Engine clean as a pin stopped drive operation
Seems worth saving. Need spec sheet and parts list.
Need torque specs for briggs and Stratton 21 HP 3318770869g5 on craftsman tractor.Thanks
Need flywheel nut torque settings for a Vanguard 14HP
Model Type Code
261777 013601 93021933
Hi I need the torque setting for the connecting rods on a briggs 16hp twin model 401417. Thanks
need torque specs for briggs & stratton 21 hp 3318770869g5
Head Gasket – 160 Inch/Pounds = 13.333 Foot/Lbs.
Need sump pan torque specs and secuance.model # 331977, type is 0010g1, code is 130219zd. 21 hp single cylinder ohv platinum series with xrd.thanks.
hi, I need rod and heads torque settings for a briggs & Stratton mod 42A7071238 01. thank you
Need torque specs rod cap bolts on Kohler 22 hp
i need heads torque specs on a kohler 20hp engine
model 28N702, type 1143E1
head bolt torque?
Need head bolt torque specs for model # 205432 please
I need correct connecting rod and cylinder head torque for a MODEL# 28T707, I am not finding it anywhere,unless this engine # is equivalent to a newer model. Thanks
I hope do not offend but did you check on the metal cover that houses the pull cord? I look for awhile then went to the briggs and Stratton website. Some I find stamped on the head but others I find in on the housing I mentioned or on some really old models that somebody else tore apart and rebuilt with non B&S parts the number is gone. I hate to admit it but on those jobs I go with the torques specs I find on model that are close and luckily so far I haven’t had any issues.
I can not find the model, type or code on this Briggs and Stratton engine anywhere. I have searched the motor 3 or 4 times and can’t find it. This is the second B and S motor I have worked on that I can’t find the model, type and code on. I need the torque spec for the head. The only information I have is that it is a 500E Series motor. 5.00 ft lbs gross torque and it’s 140cc. This is per SAE J1940 and it’s 2600 RPM idle speed. Does anyone know what the head torques on?
If overhead valve it is stamped on top cover of it. Proably covered in oil and grease too.
On those series motors the the model and type are stamped on the side of the crankcase. Theres also a sticker with the code and a bar code on the flywheel cover. Scan the bar code with your phone and it will give you the model and type.
Model 331877 1371 type B1
What is the torque of cylinderhead bolts?
What are the valve clearances?
Tanks
Cylinder head torque specifications on model 31H777
Also valve clearance for intake and exhaust
I need the torquues for the following please. The engine is a 3.75hp briggs &strattonc.cylinder head,big end beariing cap, fly wheel nut,spark plug,and sump bolts.many thanks edward.
1212D1050172F8 engine needed flywheel torque thanks.
422707 opposed twin 18hp torque specs for head bolts and specs as well
Briggs & Stratton Vanguard 2.4hp
Model: 050032
Type: 0122E1
Code: 04040149
Head Bolt Torque Specs ???
Rocket Arm Torque Specs ???
Valve Cover Torque Specs ???
Any help would be greatly appreciated!!!
Need valve clearance spec for B&S 13.0 HP model 28T707
NEED HEAD BOLT TORQE SOECS FOR MODEL 31G777 0200B1
my model is 124t020203b1
does this mean i look under the 120000 in the chart?
What are the torque specifications for the sump pump on a Briggs & Stratton 15 horse I’m sorry not 15 horse 12 and a half flat head
Hey, I have a 22.5 Briggs that I need torque pattern and torque specs for a cylinder head.
Model 44k777
Type 0125 G1
Code 080314YG
need the torque and sequence to tighten head bolts on briggs 26 hp model # 44p777 type 0412e1
I need the cylinder head bolt torque specifition on B&S 28R707 1120E1
I have and old B&S and need valve clearance and torque limits for head bolts.
Model 00081 1FD
Type 110412
Code 0154 E1
Thank you
Hello. I need the sequence and torque for cylinder head of engine model 124T020243B1 (650 series). Thanks in advance
Hello. I am looking for head bolt torque values for Briggs and Stratton Engine Model 1502 12 0127 B8
Thank you!
I need torque settings and sequence for a 190cc engine.
128M02 0943 – F1 – 12051558
May 2012
I have the torque amount for a 136202 5h.p. Briggs but what is the torque sequence?
looking for torques for rebuilding a 1984 252707 11HP single aluminum cylinder for a 111 John Deer Lawn Tractor. have the complete rebuild kit, carb kit looking for the magnetron kit to replace the points and coil
I Need torque specs the head gasket for model 3319 77 0102 G5 serial 12 0910 ZD 63819 and valve gap
How do you know what series it is
What is the cylinder head torque specs for a model 33R877 briggs and straton engine
Trying to find the torque for the crankcase bolts on a B&S 675 engine. I’m getting everywhere from 15 foot pounds to 90 inch pounds and need to know which is correct.
Need torque sequence and specs:
Head bolts
Rockerarms
Valve covers
Engine model: 4467770246EI
THANK YOU
my model number is not on your chart, where do i go from here
Need the engine specs for model 3318772374
I’m rebuilding a 22hp murry tractor engine
Model number is 407577
Type is 0292 E1
Code is 040210YG
The model number on the tractor is 405000X8
I need the torque specs for pretty much everything.
i need the torque specification for a briggs& stratton engine7.75 oilcase bolts.
Torque values on the head, for 22hp Briggs v twin 40H777
Please I need some help please can I have the torque on a connecting rod for a Briggs and Stratton 450 series 148cc
Regards
Eugene
looking for the head bolt torque for model 28M707
needing head torque and pattern sequence for craftsman pressure washer model# 25b554d099 247.772460 Briggs n Stratton 3.5 h/p sm. engine #10t 8020711b1 thank you
Needing torque on BS 18 vanguard engine for for & head boots. 3504471111E1. Also intake & valve clearance. Thanks
Hi, I need the head bolt torque and the connecting rod torque for a B/S mod# 196707. Thanks
i need the cylinder head torque spec for briggs and stratton generator model 030239